Specifications
Log Capacity |
| 25” Long, 8” Diameter | Tire Air Pressure |
| 60 PSI Cold | |||||||
|
|
|
|
|
|
|
|
|
|
|
| |
Overall Dimensions |
| Wedge Size |
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
| ||
Hydraulic Fluid |
| 2.5 Gallons | Toe Plate Thickness |
|
| |||||||
Capacity |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Wheel Size |
|
| 8” Diameter, D.O.T. | Ram Diameter |
|
| ||||||
|
|
|
| Approved |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| ||
SKU 91839 |
|
| SKU 91840 |
|
|
| SKU 92199 | |||||
|
|
|
|
|
|
|
|
|
|
| ||
Engine |
| 9HP | Engine |
| 9HP |
|
| Engine |
| 6HP Robin® | ||
Cylinder Diameter |
|
|
| Cylinder Diameter |
| 5” |
| Cylinder Diameter | 4.5” | |||
|
|
|
|
|
|
|
|
|
| |||
Tons of Force |
|
| 24 | Tons of Force |
| 30 |
| Tons of Force | 22 | |||
|
|
|
|
|
|
|
|
|
|
| ||
Pump |
| Haldex® 11 GPM, 2- | Pump |
| Haldex® 16 GPM, 2- |
|
| Pump |
| Haldex® 11 GPM, 2- | ||
|
| Stage Gear |
|
| Stage Gear |
|
|
|
| Stage Gear | ||
Weight |
|
| 498 Lbs. | Weight |
| 640 Lbs. |
|
| Weight |
| 492 Lbs. | |
|
|
|
|
|
|
|
|
|
|
|
|
|
This product requires engine oil, hydraulic oil, and fuel to be added before starting. Attempting to start the engine without oil will ruin the engine and void the warranty.
Before starting the engine, refer to the engine owners manual for additional engine maintenance information.
Note: 8” maximum diameter applies to most soft to medium types of woods. Maximum diameter of hardwoods may vary depending on density of the wood.
Note: Read and follow the instructions and safety warnings in the manual that accom- panies the Robin® engine. Engine specifications are listed in the engine manual.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to re- duce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.Keep work area clean. Cluttered areas invite injuries.
2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose to rain. Keep work area well lighted.
3.Keep children away; this unit may produce hazardous flying debris. Children must never be allowed in the work area. Do not let them handle machines or tools.
4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
| 91839, 91840 | For replacement parts, please call | RAV 01/07 |
SKUs | Page 2 | ||
| & 92199 |
|
|
