Harbor Freight Tools 91956 operating instructions Using the Binoculars

7.Remove batteries if the Digital Camera Binocular is not used for a long period of time.

8.Never look at the sun through the binocular/camera. This will result in serious damage to your eyes.

Your Digital Camera Binocular comes completely assembled. It is important that you read the entire manual to become familiar with the product BEFORE you use the Digital Camera Binocular. Before using the Digital Camera Binocular be sure that you have all parts described in the Parts List and Assembly Diagram located on the last pages of this manual.

The 8 x 22 Digital Camera Binocular has some terrific features. The 8 x 22 Digital Camera Binocular allows you to:

•Shoot pictures without film

•Shoot video

•Transfer photos and video to your PC to edit, create, change and store.

•Shoot up to 35 seconds of video

The following pages in this owner’s manual will show you how to use the camera’s features:

•two (2) resolution modes-

High (H) - VGA resolution for up to 75 pictures and Low (LO) - QVGA resolution for up to 300 pictures

•Video mode

•Self-timer for video and photos

•Fixed focus

•USB Port

In order to use a computer with the Digital Camera Binocular the computer must run Windows® 98 / 98SE / Windows® ME/ Windows® 2000 or Windows® XP. The computer must have a 336 MHz processor or faster. The computer must have a CD-ROM drive, 64 MB of RAM, an available USB port, 600 MB of free hard drive space. You also must have a Video card with 2 MB of RAM minimum 16 bit display. None of the products mentioned here are included with the Digital Camera Binocular.

Using the Binoculars

Hold the Binocular up to both eyes so that both are looking through the lenses. With one hand on each of the barrels, move the barrels up or down to adjust the distance between them, until you are seeing one complete and normal looking view through both the Binocular lenses-see Figure 1.

To focus the Binocular, select an object about 15 feet away. Look through the lenses with both eyes. Turn the Focus Wheel (1) until the object appears in focus. Closing your left eye, view the object through your right eye. To make fine changes, turn the right Eyepiece until the object appears clear- see Figure 1.

LCD (4)	Figure 1
Focus Wheel (1)	Shutter
Mode Button (2)
	Button (3)

REV 10/04

SKU 91956 For technical questions, please call 1-800-444-3353. Page 3