Harbor Freight Tools 92349 operating instructions Maintenance

Operation (continued)

9.Occasionally, you will have to manually break a nut loose before you can remove it with the Impact Wrench. To do so, use a Breaker Bar (not included) and Socket to break the nut loose. Then, proceed as discussed in number 8 on page 5.

10.Replace the wheel on the vehicle hub, aligning the wheel studs with the bolt holes in the wheel.

11.Install the wheel lug nuts, following the vehicle manufacturer’s recommendations. To avoid cross-threading the lug nuts, thread the nuts on by hand first, before using the Impact Wrench.

CAUTION

Do not use the Impact Wrench to tighten the lug nuts.

The torque may exceed the vehicle specifications and damage may result.

12.When the wheel is securely refastened, use a torque wrench (not included) to check the torque on all bolts and ensure that the tightness meets the manufacturer’s recommen- dations. Check under the vehicle and remove any tools. Lower the vehicle, disconnect the tool and replace the lift and the Impact Wrench to their storage places.

Maintenance

1.When not in use, store your Impact Wrench and its accessories in its case, in a se- cure, dry place. Protect it from water, moisture, oil, fuel, grease or other foreign materials which may damage the case, moving parts, or electrical components.

2.This tool should only be repaired by a qualified technician.

3.The 12 Volt Plug-In (24) assembly has a fuse that will eventually need replacing. Remove the Cap at the end of the Plug-In and replace the fuse making sure to re- place the pieces below, in the exact same order as shown. Only replace the fuse with another 12A-250V fuse of the same style.

12Volt

Plug-In (24)

Cap

Fuse

SKU 92349 For technical questions, please call 1-800-444-3353 Page 6