ASSEMBLY INSTRUCTIONS
1. WARNING! To avoid health hazards: Before assembling and using, and after using this product, immerse all parts of the Meat Mixer in warm, clean water and thoroughly wash with an
2.Make sure to place the Tank (11) of the Meat Mixer on a dry, flat, level, sturdy table/counter surface capable of supporting the weight of the Meat Mixer, food products, and any other utensils and equipment.
3.To assemble, insert the Spring (9) onto the Bolt (8). Then, from within the Tank (11), insert the threaded portion of the Bolt outward through the Right Side Mounting Hole. While compressing the Spring, screw the Small Knob (3) onto the Bolt. (See Figure A.)
4.Lower the Mixer Blade (7) into the Tank (11), and insert the end of the Mixer Blade onto the Bolt (8). Be careful when handling sharp blades. Then, align the open end of the Mixer Blade with the Left Side Mounting Hole. (See Figure A.)
5.Insert the top portion of the Handle (2) through the Left Side Mounting Hole and into the open end of the Mixer Blade (7). (See Figure A.)
|
|
| PLASTIC COVER (6) |
|
| |||||
|
|
|
|
|
|
| ||||
|
| HANDLE (2) | MIXER BLADE (7) |
|
| |||||
|
|
|
|
|
| SPRING (9) |
|
| ||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
LARGE KNOB (10) |
| BOLT (8) |
|
|
|
|
| SMALL KNOB (3) | ||
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
LEFT SIDE |
| RIGHT SIDE | ||
| MOUNTING HOLE | |||
MOUNTING HOLE |
|
|
| |
|
|
| ||
|
|
|
|
TANK (11)
FIGURE A
SKU 92390 For technical questions, please call