Harbor Freight Tools 92623 Grounding, Grounded Tools Tools with Three Prong Plugs

15.Always unplug the Polisher/ Sander from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.

16.When sanding, only use 7” sanding pads with a hook and loop back that attaches securely to the Backing Pad.

17.Connect to a GFCI. Always connect the Line Cord to a Ground Fault Circuit Interrupter (GFCI) protected electrical outlet.

18.Never use accessories rated for less than 3500 RPM.

WARNING! Avoid serious injury. Never install carbide tipped or steel circular saw blade for use on this Sander/Polisher. Never install a wood carving blade, carving disc with saw chain cutters, or a cutting carving disc on this Sander/Polisher. Never install abrasive cutoff discs and wheels, flap wheels, wire brushes, or wire wheel brushes.

WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker.

WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other ma- sonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with ap- proved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code 25249.5, et seq.)

GROUNDING

WARNING!

Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool or product. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician.

Grounded Tools: Tools with Three Prong Plugs

1.Tools marked with “Grounding Required” have a three wire cord and three prong grounding plug. The plug must be connected to a properly grounded outlet. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See Figure A.)

English

SKU 92623 For technical questions, please call 1-800-444-3353

Page 6