| Specifications |
ITEM | DESCRIPTION |
|
|
Continuous Power | 400 Watts |
|
|
Peak Power | 800 Watts |
|
|
Input Voltage | 12 Volts Nominal DC |
|
|
Output Voltage | 120 Volts AC at 60 Hz |
|
|
AC Receptacles | (2) Two |
|
|
Fuse | 40 Amps |
|
|
Dimensions | |
Weight | 2.8 lbs |
|
|
Indicators | Green LED = power on |
|
|
Switch | Rocker type, On / Off |
|
|
Operating Temperature | |
|
|
Battery Cables | 9 AWG, 2' (approximately) |
|
|
| - Modified sine wave with overload protection |
Features | - Low voltage alarm1 and shutdown2 |
| 1 at 11 V; 2 at about 10 V |
| Save This Manual |
You will need the manual for the safety warnings and precautions, assem- bly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future refer- ence.
Safety Warnings and Precautions
WARNING: When using this device, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1.Do not plug a battery charger into the inverter if the charger has a warning that dangerous voltages are present at the battery terminals.
2.Keep work area clean. Cluttered areas invite injuries.
3.Keep inverter away from any direct heat source or combustible material.
4.Observe work area conditions. Do not use machines or powered products in damp or wet locations. Don’t expose to rain. Keep work area well lit. Do not
REV 04/05
SKU 92708 For technical questions, please call | Page 2 |
