Harbor Freight Tools 92798 operating instructions To Charge the Impact Wrench, Figure D

5.Battery (37): The power source for the Impact Wrench is a rechargeable,

19.2 VDC Battery. Make sure to follow all safety precautions when working with the Battery. (See Figure D.)

6.Charger (39): The Charger is powered by plugging its Power Plug into a 120 volt, grounded, electrical outlet. NEVER attempt to power the Charger with any other electrical source other than a 120 volt, grounded electrical outlet. (See Figure D.)

	IMPACT HEAD
	(7)
BATTERY
(37)
	FORWARD/REVERSE
		SWITCH	TRIGGER
	(32)
			(36)
TO 120 VOLT,		CHARGER
GROUNDED,	(39)
ELECTRICAL
OUTLET.
		BATTERY
	(37)
	FIGURE D

TO CHARGE THE IMPACT WRENCH

1.NOTE: The Battery (37) requires charging. The first charge requires 1 hour charge time prior to using the Impact Wrench. (See Figure D.)

2.The Battery (37) should only be recharged when the Impact Wrench begins to run slowly. (See Figure D.)

3.When the Battery (37) requires recharging, a 1 hour charge allows the tool to operate at full power. Do not recharge the Battery longer than 1 hour, as damage to the Battery and/or Impact Wrench will occur. (See Figure D.)

4.Make sure the Trigger (36) on the Impact Wrench is in its “OFF” position. Slide the Battery (37) off the handle of the Impact Wrench. Insert the Battery into the charging socket of the Charger (39). Then plug the Charger into the nearest 120 volt, grounded, electrical outlet. (See Figure D.)

SKU 92798 For technical questions, please call 1-800-444-3353. Page 10