Harbor Freight Tools 92942 manual Specifications, Unpacking, Specific Safety Warnings

c. Do not overreach. Keep proper footing and balance at all times. This enables better control of the assembly tools in unexpected situations.

d. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts during assembly.

Specific Safety Warnings

1.Do not attempt to assemble Canopy when high wind conditions exist as personal injury and/or damage to the Canopy may result.

2.Verify that Canopy is assembled and firmly secured (using T-stakes provided) on a flat, level surface to avoid accidents.

8.The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

Specifications

Base	20’ 8-1/2” L x 20’ 6” W
Dimensions
Center Height	10’
Side Height	69-1/4”
Frame Width	18’ 1”
Pole Tubing	1-1/4”
Diameter
Connector	1-1/2”
Diameter
Tarp	14 x 14 mesh, 1000 denier nylon
	thread

3.Do not allow snow to accumulate on the Canopy; the Canopy could collapse.

4.CAUTION! Heavy, wet snow or extreme windy conditions could damage the Car Canopy. It is recommended that the Tarp be removed under these conditions to prevent damage to the Car Canopy.

5.Maintain Canopy with care. Keep the Canopy clean, dry and free of oil, grease, liquids and other debris.

6.Maintain labels and nameplates on Canopy. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

7.Do not use Canopy for any purpose other than for what it was intended. Do not use Canopy as a source of long-term shelter.

Unpacking

When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible.

CAUTION! Be alert to possible wind damage; prolonged exposure to wind can cause fasteners and hardware to loosen as the frame flexes. The Car Canopy’s frame strength will be compromised if fasteners and hardware are not tight. Periodically check and make sure all fasteners and hardware are tight. Tubes, stakes, tie downs and rope should also be periodically checked to make sure the unit is always structurally rigid.

SKU 92942 For technical questions, please call 1-800-444-3353. Page 3