framing Tubes as shown in Figures C and D, bottom.
5.Once the corners are fastened, attach the remaining Tarp Ties through the rest of the metal eyelets and onto the framing Tubes.
6.Lift one side of the roof and insert three Vertical Tubes (part #1) into the
Piece. When complete, do the same to the other side. See Figure C, below.
7.Insert a Nylon Base (part #12, not shown) onto the bottom of each Vertical Tube.
8.Secure the Nylon Bases to the ground, using the
Figure B
Turnbuckles (11)
Figure C
Tarp Ties (10)
CAUTION: The Car
Canopy must be firmly secured on a flat, level and solid surface.
Figure D
SKU 92942 | For technical questions, please call | Page 5 |
