Harbor Freight Tools 93142 operating instructions Product Features

14.Always switch to a fresh Battery Pack (15) when tool performance begins to diminish. Severe heat is most destructive to a Battery Pack. The more heat generated, the faster the Battery Pack loses power. A Battery Pack that gets too hot can be permanently damaged. Never over-discharge a Battery Pack by using the tool while tool performance is decreasing. Never attempt to discharge a tool’s Battery Pack by continuing to pull the tool Trigger. When tool performance begins to diminish, stop the tool, recharge the Battery Pack, and use the fresh Battery Pack for optimal performance.

15. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code 25249.5, et seq.)

16. WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. In addition, people with pacemakers should adhere to the following: Avoid operating power tools alone. Don’t use a power tool with the power switch (Trigger) locked on. If powered via a power cord be certain that the tool is properly grounded. A ground fault interrupt (GFCI) system is also a good precaution. This inexpensive device is a good safety measure because it prevents a sustained electrical shock. Properly maintain and inspect all tools before use to avoid electrical shock.

17. WARNING! The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

PRODUCT FEATURES

NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 12.

1. WARNING! Always make sure the Trigger of the Cordless Drill is in its “OFF” position, the Battery Pack (15) is removed from the Cordless Drill, and the Charger

(21)is unplugged from its electrical outlet prior to making any adjustments to the tool. (See Figure A.)

SKU 93142 For technical questions, please call 1-800-444-3353 PAGE 6