TORQUE SELECTOR RING
CHUCK (4)
CHARGING
INDICATOR
CHARGED
TRIGGER INDICATOR (13)
CHARGER
(21)
CHARGER 
POWER CORD
FIGURE A | BATTERY PACK |
(15) |
2.Chuck (4): Accepts up to 3/8” shank diameter Drill Bits (not included). To install a Drill Bit with the Cordless Drill pointed away from your body, hold the Chuck Sleeve firmly in place and turn the Chuck clockwise. Insert the shank of a Drill Bit all the way into the Chuck. While holding the Chuck Sleeve in place, turn the Chuck counterclockwise to lock the Drill Bit in place. (See Figure A.)
3.Trigger (13): The Trigger is operated manually simply by squeezing the Trigger to turn on the Cordless Drill and releasing pressure on the Trigger to turn off the Cordless Drill. The drill will go faster the more the trigger is squeezed.
(See Figure A.)
4.Reversing Lever (16): The Reversing Lever Switch allows you to change the rotational direction of the Cordless Drill. To change the rotational direction, make sure the Cordless Drill is at a complete stop. For a clockwise rotation, move the Switch to the right. For a counterclockwise rotation, move the Switch to the left.
(See Figure A.)
5.Torque Selector Ring: The Torque Selector Ring allows you to select up to 16 different driving torque settings, depending on the job required. To change the driving torque, make sure the Cordless Drill is at a complete stop. Then, simply turn the Torque Selector Ring to the desired setting. The drill setting is used to force the chuck not to slip and is used when drilling. (See Figure A.)
REV 05/05
SKU 93142 | For technical questions, please call | PAGE 7 |
