Maintenance and Inspection
1.The Armature (31) and Stator (36) comprise the main part of the tool. Protect these electrical components from moisture or oil intrusion.
2.Inspect the Carbon Brushes (50) regularly. Replace them if they are more than 1/3 worn or are chipped or cracked.When handling them, be careful not to damage them. To reduce wear after inspection, replace them in exactly the same way as they were removed.
3.Regularly inspect all components and fasteners to be sure they are properly installed, not damaged, and tight.Tighten any loose parts.Repair or replace any damaged components.
4. If the tool is damaged or does not function properly, take it | Inspecting the Carbon Brushes (50) |
to an authorized service technician. |
|
5.Clean the tool after each use, and store it properly. Keep it
out of reach of children and other unauthorized persons. Protect it from moisture and corrosive materials.
SKU 93179 | For technical questions, please call | Page 10 |
