SKU 92917 & 93253 For technical questions, please call 1-800-444-3353. Page 10
Do not press the Nose of the Roofing Nailer against the work surface with extra force.
Allow the tool to do the work. Always allow the tool to recoil off the workpiece.
Caution: While working on roofs, tar and dirt may build up on the Nose of the Roof-
ing Nailer. This can prevent normal operation. Remove buildup with a nonflammable
solvent. NEVER use gasoline or other flammable solvents. Do not immerse the
Roofing Nailer in an approved solvent beyond the height of the nail heads, to avoid
getting the solvent into the drive cylinder of the tool. Make sure to dry off the Roof-
ing Nailer before use. Any oil film left after cleanup will accelerate tar buildup.
When finished using the Roofing Nailer, always disconnect the tool from its com-
pressed air supply. Empty the Nail Canister (90) completely of nails. Attempt to
fire the Roofing Nailer into a piece of scrap wood to ensure it is disconnected and
is incapable of firing any nails. Always leave the Nail Canister open during this
procedure. The Canister is spring loaded and may cause parts or a nail to fly
out of the Roofing Nailer.
Make sure to store the Roofing Nailer in its accessory Carrying Case and in a clean,
dry, safe location out of reach of children.
4.
5.
6.
7.
ROOFING SHINGLE
NOSE
TRIGGER (73)
AIR SUPPLY HOSE
(NOT INCLUDED)