UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 17 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
CAUTION! Always make sure the ON/OFF Switch (86) of the Air Compressor is in its “OFF” position and the unit is unplugged from its electrical outlet prior to assembling the Compressor or making adjustments to the unit.
To Attach The Handle And Wheels:
1.To attach the Handle (50A) to the Tank (50) of the Air Compressor, align the two mounting holes in the Handle with the two mounting holes in the Tank. Secure the Handle to the Tank, using the two Lock Knobs (50B). (See Figure E.)
2.To Attach the two Wheels (53) to the Tank (50) of the Air Compressor, insert a Wheel (53) on each end of an Axle (53A). Secure the Wheels to the Axles, using two Retaining Rings (54), then two Bolts (93). (See Figure E.)
FIGURE E
HANDLE (50A)
LOCK KNOB (50B) | LOCK KNOB (50B) |
AXLE (53A) | AXLE (53A) | ||||
WHEEL (53) | WHEEL (53) | ||||
BOLT (93) |
|
|
|
| BOLT (93) |
|
|
|
| ||
RETAINING RING (54) |
| RETAINING RING (54) | |||
REV 05/06
SKU 93351 | For technical questions, please call | Page 10 |
