Harbor Freight Tools 93380 operating instructions RIP Fence Assy

2.WARNING! When using the Rip Fence assembly (1B thru 27B), always keep hands and fingers well away from the Saw Blade and cutting area.

3.Set the Rip Fence assembly (1B thru 27B) on the Right Wing (114) of the Table Saw. (See Figure X.)

4.Adjust the Rip Fence assembly (1B thru 27B) to the desired width of cut (distance from Saw Blade to Rip Fence). Then, pull down on the Lock Lever (9B) to lock the Rip Fence assembly in place. (See Figure X.)

5.Place the workpiece on the Table Saw and firmly against the Rip Fence assembly (1B thru 27B). (See Figure X.)

6.Plug the Power Cord Plug (130) into the nearest 220 volt, grounded, electrical outlet.

7.Depress the green “ON” Button on the Power Switch (137) to turn on the Table Saw. (See Figure X.)

8.When the Saw Blade is turning at full speed, slowly push the workpiece into the Saw Blade. Do not force the Saw Blade to remove material faster than it is designed to cut.

RIP FENCE ASSY.

(1BTHRU 27B)

LOCK LEVER

POWER SWITCH

(137)

O N

OFF

(9B)

FIGURE X

SKU 93380 For technical questions, please call 1-800-444-3353. Page 25