3.Before each use, inspect the Saw Blade. Using a dull Saw Blade will cause excessive wear on the Motor of the Table Saw and will not produce a satisfactory cut. Replace with a new Saw Blade when needed.

4.Before each use, open the Clean Out Door (12) and check for cleanliness. If necessary, use a vacuum to remove excessive saw dust from the interior of the Cabinet (1).

5.Every 12 months, lubricate the Geared Trunnion (52) and Front Trunnion (55). The Trunnions each have a semicircle groove that needs to be lubricated with an automotive wheel bearing grease.

6.Every 12 months, lubricate the Geared Bracket (102). The blade height Bracket pivots on a steel rod. This should be lubricated with 6 or 7 drops of light machine oil.

7.Every 12 months, lubricate the Worm Gears (18, 65). These should be lubricated with an automotive wheel bearing grease.

8.To change the V-Belts,lower the Saw Blade to its lowest point. Loosen the Bolt (35) on the Motor Bracket. Lift up on the Motor (34) to make the V-Belts (40) loose. Remove the V-Belts from the Spindle Pulley (99) and Motor Pulley (38). Replace and tension the V-Belts (the weight of the Motor should apply enough tension to the V-Belts). Then, retighten the Bolt on the Motor Bracket.

(See Figure Z, next page.)

Check the V-Belt tension after the Table Saw has been used for a few hours. Check and adjust as follows:

A.With moderate pressure, push the center of each V-Belt. Note the amount of deflection. Deflection should be approximately 1/2”. (See Figure Z.)

B.If the deflection is not 1/2”, loosen the Bolt (35) on the Motor Bracket. Shift the Motor up or down to increase or decrease the V-Belt tension. Then, retighten the Bolt on the Motor Bracket. (See Figure Z.)

C.Check the V-Belt tension again. Also, make sure the Spindle Pulley (99) and Motor Pulley (38) are lined up. (See Figure Z.)

9.To clean the exterior parts of the Table Saw, use only a clean cloth and mild detergent to clean the body of the Saw. Then, dry. Do not immerse any electrical part of the tool in any liquids.

SKU 93380

For technical questions, please call 1-800-444-3353.

Page 28

Page 27 Page 29
Page 28
Image 28
Harbor Freight Tools 93380 operating instructions See Figure Z, next
Page 27 Page 29

93380 specifications

Harbor Freight Tools is well-known for offering a wide range of high-quality tools at affordable prices, catering to both DIY enthusiasts and professionals alike. One product that stands out in their extensive catalog is the Harbor Freight Tools 93380, a versatile and reliable air compressor that has garnered attention for its performance and features.

The Harbor Freight Tools 93380 is a portable air compressor designed to meet the demands of various projects, whether in a home workshop or on the job site. With a powerful 1.5 horsepower motor, this unit delivers a maximum pressure of 125 PSI, making it suitable for inflating tires, powering air tools, and other pneumatic applications. Its convenient size ensures it can be transported easily, while still providing the necessary power to handle heavy-duty tasks.

One of the standout features of the 93380 is its 3-gallon tank. This tank size strikes a balance between portability and the volume of compressed air available for use. The compressor operates at a relatively quiet level, which is a great advantage for users who need to work in residential areas or enclosed spaces where noise could be an issue.

The technology behind the Harbor Freight Tools 93380 incorporates an oil-lubricated pump, which enhances its durability and performance. This design helps to extend the lifespan of the compressor while reducing wear and tear, ensuring that users can rely on it for their projects over the long term. Additionally, the compressor is equipped with a quick-connect fitting, allowing for easy attachment of air hoses and tools, thus simplifying the setup process.

Safety features also play a critical role in the design of the 93380. It includes a pressure relief valve to prevent over-pressurization, a necessary component for maintaining safe operation. Furthermore, the unit is equipped with a sturdy handle and rubber feet, ensuring stability during use and transport.

In summary, the Harbor Freight Tools 93380 air compressor offers a compelling combination of portability, power, and reliability. With its efficient motor, convenient tank size, and user-friendly features, it is an ideal choice for both casual users and professionals looking for an affordable yet effective air compressor solution. Whether tackling automotive projects, enhancing woodworking tasks, or performing various household repairs, the 93380 stands out as a noteworthy tool in the air compressor market.
Top Page Image Contents