4.Observe work area conditions. Keep work area well lit. Do not use pneumatic tools in the presence of flammable gases or liquids.
5.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, extension cords, or air hoses.
6.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
7.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool, and do not use this tool for a purpose for which it was not intended.
8.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically
9.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across running tools or air hoses.
10.Disconnect air hose and release any
11.Remove adjusting wrenches. Check that adjusting wrenches are removed from the tool and work surface before attaching to an air source.
12.Avoid unintential starting. Be sure the Throttle (2) is in the OFF position when not in use and before plugging in. Do not carry any tool with your finger on
Throttle, whether it is attached to an air source or not.
13.Stay alert. Watch what you are doing. Use common sense. Do not operate any tool when you are tired.
14.Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.
15.Compressed air only. Use clean, dry, regulated, compressed air at 90 PSI. Never use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool.
SKU 93629 | For technical questions, please call | PAGE 3 |
