ASSEMBLY INSTRUCTIONS
CAUTION! Always make sure the Power Switch (98A) of the Engine is in its “OFF” position prior to performing any service, maintenance, or cleaning of the Water Pump or Engine.
To Add Engine Oil:
1.IMPORTANT! Prior to first using the Water Pump, the Engine MUST be filled with a high quality
OIL DIPSTICK (65A)
MAXIMUM OIL LEVEL
MINIMUM OIL LEVEL
FIGURE A
2.To do so, unscrew and remove the Engine Oil Dipstick (65A). Pour approximately 2/3 quart of engine oil into the Dipstick Hole. Do not overfill. (See Figure A.)
3.Clean the Oil Dipstick (65A). Then screw the Dipstick fully back into the Dipstick Hole. Unscrew and remove the Oil Dipstick again, and observe the level of en- gine oil on the Dipstick. The oil level should appear between the “MINIMUM” and “MAXIMUM” indicator marks on the Oil Dipstick. (See Figure A.)
4.If necessary, continue adding engine oil, while rechecking the Oil Dipstick (65A), until the oil level reaches the “MAXIMUM” indicator on the Oil Dipstick.
Do not exceed the “MAXIMUM” indicator mark on the Oil Dipstick. (See Figure A.)
5.When finished adding engine oil, carefully screw the Oil Dipstick (65A) back into the Dipstick Hole. (See Figure A.)
SKU 93662 | For technical questions, please call | Page 7 |
