PRODUCT SPECIFICATIONS
Motor | 4200 RPM, 18 Volt |
| ||
|
|
| ||
Blade Specifications | 24 T Carbide Tip / 5000 RPM / | E194601 | ||
61/2" Diameter x 5/8" Arbor | ||||
| ||||
Cutting Depths and Angles | 2" @ 90°; 11/ | " @ 45° |
| |
4 |
|
| ||
| 50° Maximum Bevel |
| ||
Battery | 18 Volt NiMh Battery, |
| ||
One Hour Charge Time |
| |||
|
| |||
|
|
| ||
Weight | 9.5 lbs. with Battery |
| ||
|
|
| ||
Charger Base Input | 110 VAC, 60 Hz |
| ||
|
|
|
| |
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES FOR ALL BATTERY OPERATEDTOOLS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.
SKU 93808 For technical questions, please call
Page 2
English
