7.Causes and operator prevention of “kickback”: Kickback is a sudden reaction to a pinched, bound, or misaligned Saw Blade (10), causing an uncontrolled Saw to lift up and out of the workpiece toward the operator. When the Saw Blade is pinched or bound tightly by the kerf (i.e. the slot that was cut) closing down, the Saw Blade stalls and the Motor reaction drives the tool rapidly toward the operator. If the Saw Blade becomes twisted or misaligned in the cut, the teeth at the back edge of the Saw Blade can dig into the top surface of the workpiece, causing the Saw Blade to climb out of the kerf and jump back toward the operator. Kickback is a result of tool misuse and/or incorrect operating procedures or conditions and can be minimized by taking proper precautions as given below:

A.Maintain a firm grip with both hands on the Saw, and position your body and arm to allow you to resist kickback forces.

B.When the Saw Blade (10) is binding, or when interrupting a cut for any reason, release theTrigger (4) and hold the Saw motionless in the workpiece until the Saw Blade comes to a complete stop. Never attempt to remove the Saw from the workpiece or pull the Saw backward while the Saw Blade is in motion or kickback can occur.

C.When restarting the Saw in the workpiece, center the Saw Blade (10) in the kerf and check that the saw teeth are not engaged into the workpiece. If the Saw Blade is binding, it may walk up or kickback from the workpiece as the Saw is restarted.

D.Support large panels to minimize the risk of Saw Blade pinching and kickback. Large panels tend to sag under their own weight. Supports must be placed under the panel on both sides, near the line of cut and near the edge of the panel.

E.Do not use a dull or damaged Saw Blade (10). Unsharpened or improperly set Saw Blades produce a narrow kerf causing excessive friction, Saw Blade binding and kickback.

F.Make sure all Saw adjustments are tight and secure before making a cut. If Saw adjustments shift while cutting, it may cause binding and kickback.

G.Use caution when making a pocket cut into existing walls. The Saw Blade (10) may cut objects that can cause kickback. Always check to make sure there are no electrical wires or cables in the cutting path.

8.Get in Position for and Perform the Cut:

A.Rest the front section of the Foot (35) on the edge of the workpiece. Line up the Saw Blade (10) with the line you will cut along.

B.Press the Safety (21) in and squeeze the Trigger (4). Allow the Saw Blade to rotate up to full speed before evenly moving the Saw along the cut.

Do not force the saw, allow it to cut at its own pace.

9. Release the Trigger (4) and Safety (21) once the cut is completed. As a safety measure, remove the Battery (64) when work is completed.

SKU 93827

For technical questions, please call 1-800-444-3353.

Page 13

Page 12 Page 14
Page 13
Image 13
Harbor Freight Tools 93827 operating instructions Get in Position for and Perform the Cut
Page 12 Page 14

93827 specifications

Harbor Freight Tools has long been known for offering a wide range of quality tools at competitive prices, and the model 93827 is no exception. This specific model, often considered a staple for both amateur and professional users, showcases a blend of functionality, durability, and affordability.

The primary feature of the Harbor Freight Tools 93827 is its impressive lifting capacity. This hydraulic floor jack is designed to handle up to 2 tons, making it an ideal choice for lifting cars, trucks, and other large vehicles with ease and safety. Its heavy-duty steel construction ensures longevity and resilience, allowing users to rely on it for various lifting tasks.

One of the standout technologies integrated into the Harbor Freight 93827 is its dual piston pump, which provides quicker lifting capability compared to standard jacks. This feature allows users to raise their vehicle with fewer pumps, maximizing efficiency during tire changes or maintenance work. The pump action is smooth and consistent, designed to prevent sudden drops and ensure safety.

Another key characteristic of the 93827 is its low-profile design. With a minimum height that allows it to slide under most vehicles, this jack is particularly advantageous for sports cars and lower-profile vehicles. Once the jack is in position, it can be raised to a maximum height that accommodates effective access to the undercarriage for repairs and inspections.

In addition to its functional attributes, the 93827 also incorporates a rubberized saddle pad to protect the vehicle's frame during lifting. This thoughtful design consideration shows that Harbor Freight values not only performance but also the integrity of the vehicles being serviced.

Portability is another significant feature of this hydraulic jack. With built-in wheels and a compact footprint, it can be easily maneuvered in tight spaces and stored away when not in use. Whether in a workshop, garage, or out on the job site, the Harbor Freight 93827 is designed for convenience.

Overall, the Harbor Freight Tools 93827 hydraulic floor jack stands out as an outstanding choice for those seeking reliable lifting equipment. Its robust construction, quick lift technology, and user-friendly features render it a popular option for both DIY enthusiasts and professionals alike, proving that quality does not necessarily have to come at a high price.
Top Page Image Contents