Harbor Freight Tools 93853 Unpacking, Product Features, Refer to the Assembly Diagrams on

UNPACKING

When unpacking, check to make sure all the parts shown on the Parts List on page 16 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

PRODUCT FEATURES

NOTE:

For additional information regarding the parts listed in the following pages,

refer to the Assembly Diagrams on page 17.

1. CAUTION! Always make sure the Power Switch (66) of the Demolition Hammer is in its “OFF” position and the tool is unplugged from its electrical outlet prior to adding accessories or performing maintenance on the tool.

FRONT CAP

(1)

SLIDER

(4)

		OIL CAP
		(45)
				POWER SWITCH
	KNOB	(66)
	(105)
AUXILIARY HANDLE				VARIABLE
(104)
			SPEED CONTROL
FIGURE E		(72)

1.Oil Cap (45): Prior to the Demolition Hammer’s first use, remove the Oil Cap and check to make sure the tool is properly filled with grease. If necessary, fill the tool with approximately 1-1/4 ounces of #3 Lithium-based grease (not included). Then, replace the Oil Cap. Thereafter, replace the grease at the end of every 70 to 80 hours of tool use.

(See Figure E.)

SKU 93853 For technical questions, please call 1-800-444-3353 PAGE 11