7.Do not operate product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the product.
8.Use eye protection. Always wear ANSI approved impact safety goggles during assembly.
9.Do not exceed the product’s maximum load capacity of 1200 Lbs (combined ramps).
10.Make proper ground contact. Only use on a flat, solid, dry surface capable of supporting the Aluminum Ramp and its maximum capacity load of 1200 Lbs. (combined ramps). Make certain that the tongue edge fully contacts the tailgate of the vehicle and that both safety chains are secured in place.
11.Support the Ramp. Make certain that the Ramp Safety Chains are attached to the vehicle before placing a load on the Ramp.
12.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts.
13.Do not force this product. Do not use inappropriate attachments in an attempt to exceed the ramp’s capacity.
14.Keep children away. Children must never be allowed in the work area.
15.Keep the Ramp clean. Prior to each use, clean dirt, oil, or any debris off the ramp.
16.Make certain that no persons or pets are under the Ramp or vehicle during loading.
17.Be aware of dynamic loading! If a weight drops onto or bounces on the Loading Ramp, it will create, for a brief instant, an excess load, which may result in damage to the Ramp, the vehicle and/or may result in personal injury.
18.Contact between the tongue of the Ramp and the tailgate of the vehicle, may result in damage to the vehicle’s body finish.
19.Tailgate must be able to support the Loading Ramp and any vehicle or object loaded into the vehicle.
20.Never attempt to drive one side of a four wheel vehicle up the ramp in order to use the Ramp as a vehicle lifting device.
Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Unpacking
When unpacking your Aluminum Loading Ramp, make certain that all parts on page 6 of this manual are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at
SKU 94057 | For technical questions, please call | Page 3 |
