Harbor Freight Tools 94057 SKU For technical questions, please call, Technical Specifications

THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below:

Model______________ Serial No._____________ Purchase Date_______________

SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly.

The Aluminum Loading Ramp can convert into a single load ramp or two single load ramps by removing the hinges.

Technical Specifications
Construction:	Extruded Aluminum ridged platform and side railings
Overall Dimensions:	72” L x 30-1/4” W x 2-13/16” H
Angle Approach:	15-18 degree upward
Approach Length:	2-3/4”
Hinge Dimensions:	3-7/8” L x 3-1/8” W x 5/8” H x 3/32” Thick
Bolt Length:	4-3/8” x 5/16” Diameter
Hardness:	8.8 metric or Grade SAE 5
Chain (QTY = 2):	37” with 1-1/8” links, 0.155” OD. with “S” type hooks
Maximum Weight Capacity:	Rated at 1200 Lbs. (combined ramps, evenly distributed)
Net Weight:	34-1/2 Lbs.

Safety Warnings and Precautions

WARNING: When using product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this product!

1.Keep work area clean. Cluttered areas invite injuries.

2.Observe work area conditions. Keep work area well lighted.

3.Store idle equipment. When not in use, the Ramp must be stored in a safe and clean location. Always lock up products and keep out of reach of children.

4.Use the right product for the job. There are certain applications for which the Loading Ramp was designed. Do not modify the Loading Ramp and do not use the Loading Ramp for a purpose for which it was not intended.

5.Check for damaged parts. Before using any product, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for any broken or damaged parts and any other conditions that may affect its operation. Replace or repair damaged or worn parts immediately. Note: Dents or other imperfections in the Aluminum Ramp may lead to a weakening of the structural strength of this product; do not use this ramp if this type of damage is noted.

6.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty.

REV 08e

SKU 94057 For technical questions, please call 1-800-444-3353. Page 2