Engine will be run in temperatures below 32 degrees Fahrenheit, use SAE 5W-30weight oil. (See Figure E, prior page.)

3.To do so, unscrew and remove the Oil Dipstick (65A). Pour engine oil into the Dip- stick Hole until the level of oil is even with top edge of the Dipstick Hole.

(See Figure E.)

4.Make sure to screw the Oil Dipstick (65A) firmly back into its Dipstick Hole.

(See Figure E.)

To Fill The Fuel Tank:

1.Prior to first using the Generator, the Fuel Tank (31) must be filled with high octane unleaded gasoline. (See Figure E.)

2.To do so, remove the Fuel Tank Cap (34) and fill the Fuel Tank (31) with unleaded gasoline. Then, replace the Fuel Tank Cap. Thereafter, check the Fuel Gauge (35) for the amount of unleaded gasoline. When necessary, refill the Fuel Tank.

(See Figure E.)

3.NOTE: Periodically, make sure to check the Fuel Filter (32) for excessive dirt and debris. If necessary, remove the Fuel Filter and clean with compressed air.

(See Figure E.)

OPERATING INSTRUCTIONS

1.Check to make sure the Engine Ignition (2) is in its “OFF” position.

(See Figure D.)

2.CAUTION! Make sure to unplug any load from the Generator before starting to prevent permanent damage to any appliances, tools, or equipment.

3.CAUTION! Engine oil MUST be added to the Engine’s crankcase prior to start- ing and running the Engine. Failure to add oil will damage the Engine and void its warranty. (See pages 12 and 13, and Figure E.)

4.Before the first use, the Fuel Tank (31) must be filled with a high octane, unleaded gasoline. (See pages 12 and 13, and Figure E.)

a.WARNING! Never fill the Fuel Tank (31) completely. Fill the Fuel Tank to 1/2” below the bottom of the filler neck to provide space for fuel expansion. Wipe any fuel spills from the Engine and Generator before starting the Engine.

b.WARNING! Never fill the Fuel Tank (31) when the Engine is running or hot. Do not smoke when filling the Fuel Tank.

SKU 94191

For technical questions, please call 1-800-444-3353.

Page 13

Page 12 Page 14
Page 13
Image 13
Harbor Freight Tools 94191 warranty Operating Instructions, See Figure E To Fill The Fuel Tank
Page 12 Page 14

94191 specifications

Harbor Freight Tools is widely recognized for delivering high-quality tools at affordable prices, and one of the standout products in their lineup is the 94191 6-Inch Bench Grinder. This versatile tool is perfect for both DIY enthusiasts and seasoned professionals alike, providing a powerful solution for sharpening, grinding, and polishing tasks.

One of the main features of the Harbor Freight Tools 94191 is its robust 2.1 amp motor, which provides a reliable power source for various grinding applications. The motor allows the grinder to reach a maximum speed of 3,450 revolutions per minute (RPM), ensuring effective material removal and efficiency. This makes the tool ideal for sharpening blades, shaping metal, or removing rust and corrosion.

The 94191 model features a well-designed cast iron base that provides stability during operation. The vibration-free design contributes to more accurate grinding and enhances safety, reducing the risk of accidents. Additionally, the grinder comes equipped with two grinding wheels: a coarse wheel for quick material removal and a fine wheel for precision sharpening. The dual-wheel setup allows users to switch between different grinding tasks without needing to change tools.

Another great characteristic of the Harbor Freight Tools 94191 is the adjustable eye shields. These shields help protect users' eyes from debris while providing a clear view of their work. The adjustable nature of the shields allows users to position them at various angles, enhancing safety while ensuring visibility during operations.

Additionally, the bench grinder is designed with a built-in work light, which illuminates the workspace and improves visibility, especially in dim lighting conditions. This feature is particularly useful for users needing detailed work while ensuring they maintain consistency and accuracy.

The Harbor Freight Tools 94191 also integrates a maintenance-free design, making it easy to use without requiring extensive upkeep. The inclusion of rubber feet ensures stability during operation and helps absorb vibration, prolonging the tool's lifespan.

In summary, the Harbor Freight Tools 94191 6-Inch Bench Grinder is a powerful, user-friendly tool that combines various features and technologies tailored to meet the needs of any metalworking task. With its robust motor, dual-wheel setup, adjustable eye shields, built-in work light, and durable construction, this bench grinder is an excellent addition to any workshop, whether for professional or personal use.
Top Page Image Contents