Harbor Freight Tools 94434 operating instructions Product Features, Figure a

chemicals are: lead from lead-based paints, crystalline silica from bricks and ce- ment or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code 25249.5, et seq.)

16.WARNING! People with pacemakers should consult their physician(s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. In addition, people with pacemak- ers should adhere to the following: Avoid operating power tools alone. Don’t use a power tool with the power switch (Trigger) locked on. If powered via a power cord be certain that the tool is properly grounded. A ground fault interrupt (GFCI) sys- tem is also a good precaution. This inexpensive device is a good safety measure because it prevents a sustained electrical shock. Properly maintain and inspect all tools before use to avoid electrical shock.

17.WARNING! The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.

PRODUCT FEATURES

NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 12.

Auxiliary

handle

Depth

CHUCKGauge

CHARGING

INDICATOR

CHARGED

INDICATOR

TORQUE

SELECTOR RING CHARGER

(26)

TRIGGER

(19)CHARGER

POWER CORD

BATTERY PACK
(22)	FIGURE A

1.WARNING! Always make sure the Trigger of the Cordless Drill is in its “OFF” position, the Battery Pack (22) is removed from the Cordless Drill, and the Charger

SKU 94434 For technical questions, please call 1-800-444-3353 PAGE