Harbor Freight Tools 94748 manual Unpacking, Product Features, See Figure E

UNPACKING

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

PRODUCT FEATURES

FIGURE E

SPEED ADJUSTER

(56)

LOCK BUTTON

(14) POWER SWITCH

POWER CORD/PLUG

(15)

FRONT HANDLE

(31)

LOCK KNOB

(27)

(55)VACUUM BAG

(65)

ADJUSTING

KNOB

(54)

LEVER

(39)

SANDING BELT

(66)

1.Power Switch (27): The two-finger Power Switch is a simple “ON/OFF” switch that when pressed and held turns on the Belt Sander. To turn off the Sander, release pressure on the Power Switch and the switch will automatically return up to its “OFF” position. (See Figure E.)

2.Lock Button (14): The Belt Sander features a Lock Button that allows continu- ous operation without constantly holding the Power Switch (27). To lock the Power Switch to its “ON” position, squeeze the Power Switch, depress the Lock Button, and release the Power Switch. To unlock the Power Switch, squeeze the Power Switch, and then release the Power Switch without depressing the Lock Button.

(See Figure E.)

3.Power Cord/Plug (15): The Power Cord/Plug must only be connected to a 120 volt, grounded, electrical outlet. Do not pull on the Cord to remove the Plug from its electrical outlet. (See Figure E.)

SKU 94748 For technical questions, please call 1-800-444-3353 PAGE