Specifications
Electrical Requirements | 120 V~, 60 Hz, 2 A | 93MA | |||
Motor No Load Speed | 13,000 RPM | ||||
| |||||
Dust Opening | 11/ | 4 | ” OD (Dust bag included) | E194601 | |
Dimensions | 41/2” W x 67/8” L x 53/4” H | ||||
| |||||
Backing Pad Dimensions | 4” W x 41/2” L |
| |||
Weight | 21/2 lb. |
| |||
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, oper- ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Work Area
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Make sure there is adequate surrounding workspace.
2.Do not operate power tools in explosive atmospheres, such as in the pres- ence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3.Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed.
ELECTRICAL SAFETY
1.Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly
REV 02/07
SKU 95020 | For technical questions, please call | Page |
