Page 4SKU 95365 for technical questions, please call 1-800-444-3353.
Bottom Support
Assembly Holder (4)
Nut (6)
Bottom Support
Assembly Brace (7)
Handle Wheel (13)
Washer (5)
Figure 2
Attach the Top Support Assembly (15) to the top two holes on the Post (2). Secure
in place using two Screws (3)-see Figure 3.
Top Support
Assembly (15)
Screw (3)
Figure 3
operation instructions
1. Position the Workstandin a location where it will not be an obstruction to passersby.
Place it on a smooth, flat and level surface capable of supporting the Workstand
and the weight of the bicycle and components.
2. The Bottom Support Assembly Holder is adjustable. Set the Bottom Support As-
sembly Holder (4) to the desired height. With the bicycle upside down, set the top
tube (flat horizontal tube nearest the seat) of the bicycle onto the Bottom Support
Assembly Holder (4). Rest the bottom of the bicycle in the Top Support Assembly
(15).
inspection, Maintenance, and cleaning
1. before eacH use, inspect the general condition of the tool. Check for loose
screws, misalignment or binding of moving parts, cracked or broken parts, and any
other condition that may affect its safe operation. do not use damaged equip-
ment.
3.