Batteries (11)
Battery Case (9) 
Figure 5
Transparent
Inner Hood
Assembly (12)
3.Replace the dead batteries with identical AA NiCd Rechargeable Batteries (11). Be sure to follow the polarity signs inside of the Battery Case (9).
4.Reverse these steps and reassembly the Solar Insect Killer with Light. Tighten the screws and replace the cage, turning clockwise. Connect assembly to the Stake. Turn the Switch to ON. If it does not light, check to polarity of the batteries again or place the Solar Light in sunlight and charge.
5.Dispose of the used batteries properly by contacting your local community waste disposal facility.
INSPECTION, MAINTENANCE, AND CLEANING
1.To remove dust, be sure the Switch is in the OFF position. Use a damp cloth. Dry with a cloth.
2.This product is weather resistant but avoid standing water.
3.Brush off the dried bugs with the Light in the OFF position.
SKU 95500 | For technical questions, please call | Page |
