SAFETYWARNING & CAUTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS STAND!
1.KEEPWORKAREACLEAN. Cluttered areas invite injuries.
2.OBSERVE WORK AREA CONDITIONS. Do not use tools in damp, wet, or poorly lit locations. Don’t expose to rain. Keep work area well lit. Do not use electrically powered equipment in the presence of flammable gases or liquids.
3.KEEPCHILDRENAWAY. Children must never be allowed in the work area. Do not let them handle machines, tools, or equipment.
4.STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.
5.DO NOT FORCE OR MODIFTY THE STAND. It will do the job better and more safely at the rate for which it was intended. Do not use inappropriate attachments in an attempt to exceed the Stand’s capacities.
6.DESIGNED EXCLUSIVELY FOR USE WITH ITEM
7.DRESS PROPERLY. Do not wear loose clothing or jewelry, as they can be caught in moving parts.
8.USE EYE, EAR AND BREATHING PROTECTION. Always wear ANSI approved impact safety goggles if you are producing metal filings or wood chips. Wear anANSI approved dust mask or respirator when working around metal, wood, and chemical dusts and mists. Use ANSI approved ear protection when working in a loud or noisy environment.
9.READ MANUAL. Read manual for the Stand and for the Lathe (SKU 43681) before assembly and/or use.
10.DO NOT OVERREACH. Keep proper footing and balance at all times. Do not reach over or across runningmachines.
11.ASSEMBLE AND INSTALL ON A LEVEL, FLATAND CONCRETE SURFACE CAPABLE OF SUPPOERTING STAND, LATHE ANDALLWORKPIECES. Bolt the Stand to the concrete securely and ensure the Stand is square and stable berfore installing the Lathe.
12.DO NOT EXCEED THE MAXIMUM WEIGHT CAPACITY OF 1,320 POUNDS. Place Lathe on Stand in a careful and controlled fashion; dropping the Lathe on the Stand may briefly create an excess load, resutling in Stand failure and possible damage and/or personal injury.
