7.Use eye protection. Always wear
8.Do not overreach. Keep proper footing and balance at all times. Do not reach over or across a Panel Lift while in operation. Do not walk or stand under Panel Lift while in operation.
9.Maintain tools with care. Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories. The Brake Hub lining must be kept clean, dry, and free from oil and grease at all times.
10.Stay alert. Watch what you are doing, use common sense. Do not operate any tool when you are tired.
11.Check for damaged parts. Before using any tool, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualified technician. Do not use the tool if any switch does not operate properly.
12.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.
13.Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.
14.Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician.
15.Stand clear of the Panel Lift when raising or lowering a panel. Never reach through the winch wheel.
16.Lift Capacity. Never exceed the Lift’s capacity of 150 lb. Check the manufacturer’s docu- mentation to determine the actual weight of panels before attempting to lift them.
17.Never ride on the Panel Lift. Never ride on the Panel Lift, and never have people or pets in the area while operating lift.
18.Only use the Lift to raise/lower panels. After raising the panel, immediately fix in place using the recommended type, number and pattern of nails, adhesive or screws. Do not use this lift to store panels.
19.Place Panel Lift on correct surface. Only use this Lift on a stable, level, clean and dry surface that is capable of sustaining the load.
20.Stabilize the load. Ensure that the load remains stable at all times. Do not move the load while it is on the Lift.
21.Center load. Center the load on the Panel Lift.
SKU 95852 | For technical questions, please call | Page |
