3.Avoid accidental starting. Be sure the Power Switch is off before plugging in. Leaving the Power Switch on while the machine is unattended invites accidents.
4.Remove adjusting keys or wrenches before turning the powered machine on. A wrench or a key that is left attached to a rotating part of the powered machine may result in personal injury.
5.Do not overreach. Keep proper footing and balance at all times. Proper foot- ing and balance enables better control of the powered machine in unexpected situations.
6.Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Al- ways wear
Tool Use And Care
1.Do not force the machine. Use the correct machine for your application. The correct machine will do the job better and safer at the rate for which it is designed. Do not force the machine and do not use the machine for a purpose for which it is not intended.
2.Do not use the powered machine if the Power Switch does not turn it on or off. Any machine that cannot be controlled with the Power Switch is dangerous and must be replaced.
3.Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the machine. Such preventive safety measures reduce the risk of starting the machine accidentally. Always un- plug the machine from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
4.Store idle machines out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.
5.Maintain machines with care. Properly maintained machines are less likely to fail and are easier to control. Do not use a damaged machine. Tag damaged machines “Do not use” until repaired.
6.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the machine’s operation. If damaged, have the machine serviced before using. Many accidents are caused by poorly maintained machines.
7.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one machine may become hazardous when used on another machine.
SKU 95951 | For technical questions, please call | Page 4 |
