Harbor Freight Tools 95953 Set Up Instructions, Mounting, For technical questions, please call

Set Up Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

Mounting

1.If you are not completely comfortable doing this type of mounting and wiring project, seek help from a qualified service technician.

2.Consult the vehicle owner’s manual and the manual for the stereo system prior to installing this device.

3.Turn the vehicle off and disconnect the negative battery terminal.

4.Select a proper location to mount the Speaker and mark it. Keep in mind that the Wires from the Speaker must be able to reach a pre-existing speaker terminal. The Speaker can be top or bottom mounted. If there is no hole for mounting the Speaker, then a hole must be drilled at the point selected.

5.The speaker and power lines must be protected at contact points with the vehicle’s body to prevent possible shorting.

6.Installation may require that a hole be drilled through which to insert the wiring.

7.The black wire with the white stripe is the positive connection and must be connected to the positive terminal on the pre-existing speaker. The solid black wire connects to the ground or negative terminal.

8.Properly insulate and cap off all wires.

9.The unit will now broadcast whenever the pre-existing speaker does.

SKU 95953 For technical questions, please call 1-800-444-3353. Page