DMP Electronics Comprehensive Guide to DMP Zone Programming and Types for Enhanced Security

	Style
	Number Door
Reports Time-Real
	Area Follow
	Priority
	Zone Cross
	Response Fast
	Presignal
	Delay Retard
	Delay Entry
	Prewarn
	Swinger
Armed	Action
Short	* Output
	Message
Armed	Action
Open	* Output
	Message

TGL ARM	DIS STEP MNT					TGL
0	to	16	0 0 0		0 0
N	or	Y	N N N		N N
0	to	16	0 0		0 0
N	or	Y	N N N N N N N N N N
N	or	Y	N N N N N N N N N
N	or	Y	N N N N N N N N N N
1	to	16		+ +	+ + +
N	or	Y		N N	N N N
1 2	3 or	4	1
1	to	16	1-16
N	or	Y	Y Y Y N N N N N N N
S P M F			S S S S S S S S S S
			0 0 0	0 0 0 0 0 0		0
A T L – D S C A A A A A A A A A A
S P M F			S S S S S S S S S S
			0 0 0	0 0 0 0 0 0		0
A T L – D S C A A A A A A A A A A

=Zone functions not available.

Appendix

23.12.2 LX-Bus Zone Type Defaults

These are complete spellings of the abbreviations used for the zone types, such as Night and Exit.

Type - These are the abbreviations used for the zone types, such as NT and EX.

Area - For an Area or Home/Sleep/Away with Guest system this is 1 to 32. For an All/Perimeter or Home/Sleep/Away system, this is the Interior, Bedroom, or Perimeter. Select the area for NT, DY, EX, A1, A2, and AR types.

Fire Bell Out - Only available for FI, FV, and SV zones. Use any output zone number listed.

Wireless - This indicates wireless equipment is being used.

DMP Wireless - These options are for use with the DMP 1100X Wireless Receiver.

FA Series Wireless - These options are for use with the FA400‑DMP Remote Wireless Receiver.

Message - A = alarm report, T = trouble report, L = local, no report, — (dash) = no report,

Disarmed		Message		A T L D– S C			0 S 0 S 0 S		0 S 0 S 0 0		presignal.
Short			Action	S	P M F
		* Output
				– T –					A A A A	beforeYES selecting
Disarmed		Message		A T L D– S C 0– S 0T S 0– S					0T S 0T S
Open			Action	S	P M F
		* Output
											to
	Open Normally			N	or	Y	N N N	N N N	N N N N N
SeriesFA Wireless											=SetG20.+ retard
				NoneN N	10 30 60		60N N 60N N 60N N	60N N 60N N 60N N	60N N 60N N 60N N 60N N 60N N
		End - of - Line			or	Y
		Contact INT			or	Y
	Time in-Check
											G1to
	Sensitivity 1126			Low	or	High	Low Low Low Low Low Low Low Low Low Low Low
											D16,
	Count Pulse 1126			2	or	4	4 4 4 4 4 4 4 4 4 4 4
WirelessDMP			Disable	01	32 603 2404		2401Y Y 2401Y Y 2401Y Y	2401Y Y 2401Y Y 2401Y Y	2401Y Y 2401Y Y 2401Y Y 2401Y Y 2401Y Y		to500499,999, D1 to
		1126 Disarm/		N	or	Y
		Operation		N	or	Y
		LED 1142
	Time Supervision
	Contact 1114
	N/O? Contact			N	or	Y	N N N N N N N N N N N				474,480 to
		EXT 1101
	Contact 1101			INT	or	EXT	INT INT INT INT INT INT INT INT INT INT INT
Fire Bell				N	or	Y	N N N	0 N N N	0 N N N 0 N N		4506,to to
Wireless
		* Output
											Options:1
Area	INT	PERIM	BDRM	or	1	to 32
											*Output
Type	--	NT DY EX FI PN EM SV A1 A2 FV AR NT DY EX FI PN EM SV A1 A2 FV AR
XR500 Series LX-Bus Zone Information	Assign Disarm condition for NT, DY, EX, A1, and A2 only. Assign Prewarn and Entry Delay for EX only. Assign Retard and Presignal for FI, SV, A1, A2, and PN only.					Zone Type Defaults	NIGHT DAY EXIT	FIRE PANIC EMERGENCY	SUPERVISORY AUXILIARY 1 AUXILIARY 2 FIRE VERIFY ARMING

XR500 Series Canadian Programming Guide

D = door propped (When SV zone is connected to 303 Silence/ Reset Switch), S = sensor reset/alarm silence, C = early morning ambush cancel.

Output - These are 1 to 6 on-board and 500 to 999 off-board relay outputs, 450 to 474 and 480 to 499 wireless outputs, D1 to D16, and G1 to G20.

Action - This selects the action of the output:

S = steady, P = pulse, M = momentary, and F = follow

Swinger - The zone can be automatically shunted after a programmed number of trips.

Prewarn - This selects the keypad address that sounds the entry prewarn for this zone.

Entry Delay - This is the entry delay timer selected as the default for this zone.

Retard Delay - Provides a programmed retard time before an alarm initiates from a shorted zone. When used on an arming zone, the retard delay occurs when the zone is shorted before the armed state has changed. If the arming zone has Maintain as the Style, the retard delay also occurs when the zone returns to a normal state.

Presignal - Provides a keypad tone for zones in retard delay. Retard must be YES before Presignal can be selected.

Fast Response - Provides a 167ms zone response instead of the normal 500ms response.

Cross Zone - Provides cross zoning with any of the 574 zones.

Priority - Requires this zone to be in a normal condition before the area can be armed.

Style - The abbreviations for arming zone style: TGL = Toggle, ARM = Arm only, DIS = Disarm only,

STEP = Wireless arming, MNT = Maint

Digital Monitoring Products

71