Appendix
23.14 Area Account Number Messages
XR500 systems send an area account number instead of the system account number with the following panel messages/events based on the area assigned to the zone that initiated the alarm:
•WARNING: Alarm Bell Silenced (S34)
•Abort Signal Received (S45)
•Cancel Signal Received (S49)
•ALERT: System Recently Armed (S78)
•ALERT: Exit Error (S80)
•ALARM: Verify Signal Received (S96) (not currently sent on area arming systems)
The XR500 has always sent the area account number for the following messages:
•Zone event messages for all
•Arming
•Disarming
The XR500 sends the following messages using the area account number based on the lowest area number in Display Areas programming from the keypad being used:
•User Code Add/Change/Delete
•Door Access/Denied
•User 1 Ambush and Early Morning Ambush
•System Test Begin/End
•Unauthorized Entry
•Service Code and Service Request
The XR500 sends the following messages using the area account number based on the area number:
•Late to Arm for area schedules
XR500 Series Canadian Programming Guide | Digital Monitoring Products |
73