Menu Display
Menu Display
14.1
14.2
14.3
14.4
Menu Display
Armed Status:
Time Display:
Arm/DiS Display:
Menu Display
Menu Display allows you to select at which keypad addresses the user can access the following functions.
To select a keypad, enter the device number (keypad address) using the digit keys on the keypad. When a keypad is selected, an asterisk appears next to the keypad address. Enter the number again to deselect the keypad. Press the COMMAND key to display the next set of keypads (9 through 16). Refer to the Multiple Displays section at the beginning of this document.
Armed Status
Enter the keypad addresses (1 through 16) that show the armed areas. The User Menu Armed Areas function also displays the custom area name you enter in Area Information.
When only areas one to eight are used, the Armed Status display is 1 2 3 4 5 6 7 8. When areas nine or higher are used the system Armed Status display reads ALL SYSTEM ON or SYSTEM ON. Press the COMMAND key to display additional areas. Refer to the Multiple Displays section at the beginning of this document and in the XR500 User’s Guide
Time
Enter the keypad addresses that can display the time and day of the week.
Arm/Disarm
Enter the keypad addresses from which users can arm and disarm areas.
Digital Monitoring Products | XR500 Series Canadian Programming Guide |
38