16.1
16.2
Printer Reports
Arm/Dis no YES
Printer Reports
Printer Reports
Printer Reports
This section allows you to define the operation of a local printer connected to the panel through the use of a DMP 462P Printer Interface Card. The 462P allows you to connect the DMP
Printing the panel event buffer
The Display Events option in the User Menu contains a PRINT command that allows the user to send the contents of the panel event buffer to a local printer. The PRINT option is visible whether or not a 462P Printer Interface Card is attached to the panel.
Arm and Disarm Reports
Prints arming, disarming, and Late to Close reports. Includes the area number, name, and action (armed, disarmed, or late), the user number, user name, and time and date.
16.3
16.4
Zone no YES Zone Reports
Prints changes in the active zones status. Includes the zone number, name, and type as well as the action (alarm, trouble, bypass, etc.) user number (if applicable) and area name. When the Walk Test or Panic Zone Test is performed, Verify and Fail messages also print for each zone.
Usr Cmds no YES User Command Reports
Prints user code changes, outputs turned ON or OFF (if operated by a schedule, SCH is shown in Display Events in place of the user number), schedule changes, and User Menu functions.
16.5
16.6
Door Acs no YES
Supv MSG no YES
Door Access Reports
Prints door access activity. Includes the door number, first and second user number, first and second user name, and the time and date of the door access.
Supervisory Reports
Prints System Monitor Troubles and system events. See Status List - System Monitor Troubles.
XR500 Series Canadian Programming Guide | Digital Monitoring Products |
41
