DMP Electronics XR500 manual Destination 3 User Number, Email Communication Type, Smtp Server

5.9

5.10

5.11

5.12

DESTINATION 3 User numBER: 0

EMAIL COMM TYPE

NET CELL

O/C EMAIL NO Yes

O/C SMS NO Yes

Messaging setup

Destination 3 User Number

If Destination 3 is a cellular number, enter the user’s User Number for arming/disarming authorization.

Email Communication Type

Choosing NET sends email messages over the network. Choosing CELL sends email messages via cellular communication. Default is NET. This prompt appears only if any destination above is an e-mail address and the panel is a network panel (has an Ethernet connector).

O/C Email

Select YES to allow the panel to send Opening and Closing reports via email. Default is NO. This prompt displays if any destination above is an email address.

O/C SMS

5.13

Select YES to allow the panel to send Opening and Closing messages to a cell phone via SMS protocol. Default is NO. This option displays if any destination above is a cell phone number.

Monthly LIMIT: 0 Monthly Limit

This option displays if any programmed destination is a cell phone number using NET or CELL communication or an email address using CELL communication. If all destinations are email addresses using NET communication, this option does not display. This number limits the monthly incoming and outgoing SMS messages allowed to be sent or received by the panel.

A panel event that causes messages to be sent to destination cell phone numbers or destination email addresses is counted towards the panel’s monthly limit. For example, if an alarm message is sent to a cell phone number and an email address using CELL communication, a total of 2 messages are counted towards the monthly limit for the panel. SMS messages sent from a cell phone to the panel, including status requests and In Touch™ SMS Text messaging commands, also count toward the monthly limit. The limit is reset at midnight on the 14th of every month. Range is from 0 to 999. When 0 is entered, there is no limit on the number of messages able to be sent or received by the panel. Default is 0.

Note: The SecureCom Wireless text plan selected for the panel should match or exceed the programmed Monthly Limit.

The remaining options only appear if email messaging has been selected to be sent via network. The options allow the email server to be selected by the installing dealer. Typically this is the email service provided by the installing dealer. This allows opportunity for additional services to be provided to the end user.

5.14

SMTP SERVER

-

SMTP Server

Enter the SMTP (Simple Mail Transfer Protocol) Server name. The SMTP email server is responsible for sending the email to its destination. An example SMTP email server name is: mail.somedomain.com. The domain should be the email server that provides email support for your alarm customers.

5.15

SMTP PORT: 25

SMTP Server Port

5.16

5.17

5.18

SMTP USERNAME

-

SMTP PASSWORD

-

FROM EMAIL

-

The SMTP server port number is the port that the panel uses to initiate a TCP connection with the email server. The default port is 25.

SMTP Username

Most SMTP servers require a username to send email. This is sent to the SMTP server in conjunction with the SMTP Password to provide email authentication to the server.

SMTP Password

Most SMTP servers require a password to send email. This is sent to the SMTP server in conjunction with the SMTP Username to provide email authentication to the server. Passwords display as lowercase.

From Email Address

Enter the email address on file with the email service. This displays in the email message as the sender’s address.

XR500 Series Canadian Programming Guide Digital Monitoring Products

15