DMP Electronics XR500 19.5, Area Assignment, 19.6, Fire Bell Output, Zone Type Specifications

Zone Information

19.4Zone Type: Blank Zone Type

The Zone Type defines the panel response to the zone being opened or shorted. This is called the Alarm Action. There are up to 13 possible alarm action responses depending on the zone type and any restrictions it may have. See the Zone Type chart in the Appendix.

				When you assign a Zone Type to a zone, automatic zone responses are made. There
				are 12 Zone Types to choose from. Application descriptions for each zone type can
				be found in the Appendix of this manual.
				To enter a new Zone Type, press any Select key. The display lists all of the available
				Zone Types four at a time.
				Blank, Night, Day, or Exit. Press COMMAND for additional zone types.
- -	NT	DY	EX
				Fire, Panic, Emergency, or Supervisory. Press COMMAND for additional zone types.
Fi	Pn	Em	SV
				Auxiliary 1, Auxiliary 2, Fire Verify, or Arming (keyswitch). Press COMMAND for
A1	A2	Fv	AR
				additional zone types.
				If you select Blank, Night, Day, Exit, Auxiliary 1, Auxiliary 2, or Arming as the Zone
				Type, the zone must be assigned to an active area. If you select Fire, Fire Verify,
				Panic, Emergency, or Supervisory as the Zone Type, it is a 24-hour zone that is always
				armed and no area assignment is needed.
				Zone Type Specifications
				The panel contains 12 default zone types for use in configuring the system. These zone
				types provide the most commonly selected functions for their applications. All zone
				types except the Arming zone type can be customized by changing the options listed
				below. Arming zone type programming continues at Arming Zone Area Assignment.
				Refer to the Appendix for complete zone type descriptions.

19.5

area NO: -

area: perimeter

INT perim

int bdrm perim

Area Assignment

Enter the area number where the Night, Day, Exit, Auxiliary 1, or Auxiliary 2 zone is being assigned. For an Area system, area numbers 1-32 can be assigned. For a Home/Sleep/Away with Guest system, area numbers 1-9 can be assigned.

In an All/Perimeter or Home/Sleep/Away system, the currently selected area, Perimeter, Interior, Bedroom displays.

On an All/Perimeter system, select INT to program zones for the interior area and select PERIM to program zones for the perimeter area.

On a Home/Sleep/Away system, select INT to program zones for the interior area, select BDRM to program zones for the bedroom area, and select PERIM to program zones for the perimeter area.

19.6

Fire Bell Out: 0

Fire Bell Output

This output (1 to 6, 500 to 999, G1 to G20, or D1 to D16) is turned on any time a Fire, Fire Verify, or Supervisory zone is placed in alarm. The output is turned off by any the following actions:

•When the User Menu Alarm Silence function is performed.

•When a valid user code is entered to silence the bell.

•When the Silence key is pressed on the 630F Remote Fire Command Center.

•Using the Outputs On/Off function in the User Menu.

•The expiration of the Bell Cutoff time.

This output can be connected to a lamp, LED, or buzzer using the DMP Model 716 Output Expansion Module.

XR500 Series Canadian Programming Guide Digital Monitoring Products

49