DMP Electronics XR500 manual Initialization

Initialization

Initialization

NOTE: WHEN ANY PANEL PROGRAMMING IS CHANGED, THE STOP ROUTINE MUST BE RUN AND ‘SAVING PROGRAM’ MUST DISPLAY ON THE KEYPAD IN ORDER TO SAVE THE PROGRAMMING CHANGES. SEE SECTION 17.1.

2.1

Initialization

Initialization

This function allows you to clear selected parts of the panel program back to the factory defaults in preparation for system programming. Run the initialization function on all new installations.

For each section of the panel program you can initialize, a NO or YES option is provided.

CODES? NO YES

Selecting NO advances you to the next prompt.

Selecting YES advances you to a confirmation prompt.

SURE? YES NO

If you select YES, the panel initializes that section of the program and advances you to the next prompt.

If you select NO, the panel advances you to the next

SCHEDS? NO YES section prompt but does not initialize that section of the program.

2.2

Init All?	NO	YES	Clear All Memory
			NO - Leaves existing programming intact then displays Clear All Codes.
Sure?	Yes	NO
			YES - Clears all memory then displays Reset Panel. Reset the panel by shorting J16
			and re-enter programming mode to continue.

2.3

2.4

Codes? NO YES

Sure? Yes NO

Scheds? NO YES

Sure? Yes NO

Clear All Codes

NO - Leaves existing codes intact.

YES - Clears the user code and user profile memory and assigns user code number 99 to the highest user position.

Note: The user name for the default user code is created using the current programmed primary user language.

Clear All Schedules

NO - Leaves existing schedules intact.

YES - Clears all shift, and output schedules.

2.5

2.6

2.7

2.8

Events?	NO	YES	Clear Display Events Memory
			NO - Leaves existing event memory intact.
Sure?	Yes	NO
			YES - Clears the events memory.
			Clear Zone Information
Zones?	NO	YES
			NO - Leaves existing zone information intact.
Sure?	Yes	NO
			YES - Clears the zone information for all zones. All zones are marked * UNUSED *
			and must be renamed before being able to display on any system keypad.
			Clear Area Information
Areas?	NO	YES
			NO - Leaves existing area information intact.
Sure?	Yes	NO
			YES - Clears the area information for all areas. All areas are marked * UNUSED * and
			must be renamed before being able to display on any system keypad.
			Clear Output Information
Outputs?	NO	YES
			NO - Leaves existing output information intact.
Sure?	Yes	NO
			YES - Clears all programmed Output names and any output cutoff assignment.

Digital Monitoring Products XR500 Series Canadian Programming Guide

6