Harbor Freight Tools 97005 manual Basic Specifications, Refueling

5.Maintain labels and nameplates on the equipment. These carry impor- tant information. If unreadable or missing, contact Harbor Freight Tools for a replacement.

6.Have the equipment serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the equip- ment is maintained. Do not attempt any service or maintenance proce- dures not explained in this manual or any procedures that you are un- certain about your ability to perform safely or correctly.

7.Store equipment out of the reach of children.

8.Follow scheduled engine and equip- ment maintenance.

Refueling:

1.Do not smoke, or allow sparks, flames, or other sources of ignition around the equipment, especially when refuelling.

2.Do not refill the fuel tank while the engine is running or hot.

3.Do not fill fuel tank to the top. Leave a little room for the fuel to expand as needed.

4.Refuel in a well-ventilated area only.

Save these instructions.

Basic Specifications

Fuel	Type	89+ octane unleaded gasoline
	Capacity	1.7 Gallons
Engine	Type	SAE 25W (above 32° F)
		SAE 15W-40 (at 32° F or below)
Oil
	Capacity	37.2 Ounces (1.1L)
	Type	SAE 25W (above 32° F)
Pump Oil		SAE 15W-40 (at 32° F or below)
	Capacity	15.2 Ounces (0.45L)

Note: Additional specifications found in the Technical Engine Specifications chart in this manual.

The emission control system for this engine is warranted for standards set by the U.S. Environmental Protection Agency and by the California Air Resources Board (also known as CARB-Phase II). For warranty information, refer to the last pages of this manual.

At high altitudes, the engine’s carburetor, governor, and any other parts that control the fuel-air ratio will need to be adjusted by a qualified mechanic to allow efficient high-altitude use and to prevent damage to the engine and any other devices used with this product.

REV 09b

SKU 97005 For technical questions, please call 1-800-444-3353. Page 7