OPERATION
For best service, you should incorporate a regulator and an
are all available from Harbor Freight Tools.
REGULATOR
AIR
COMPRESSOR
TO |
|
|
AIR BRAD |
|
|
FINISH |
|
|
NAILER | FILTER | OILER |
TESTING THE FULL SEQUENTIAL SAFETY TRIP MECHANISM
WARNING: Even though the Nailer should be empty during this procedure, ALWAYS point the Nailer at a piece of scrap wood when testing.
1.Make sure the tool is disconnected from its air supply.
2.Completely empty the Magazine Assembly (70) of Brads.
3.The Nailer should not fire if the Safety (50A) is not depressed against the workpiece.
4.Make sure the Trigger (36) and Safety (50A) move freely, without sticking.
Trigger (36)
Magazine Assembly
(70)
Safety (50A)
REV 08g
SKU 94481 | For technical questions, please call | PAGE 6 |
