SAFETY
OPERATION
MAINTENANCE
Symbology
| Double Insulated |
| A | Amperes |
|
| WARNING marking |
|
|
|
| concerning Risk of Fire. | |||
|
|
|
|
|
| Do not cover ventilation ducts. | |
|
|
| WARNING marking | ||||
|
|
|
|
|
| Keep flammable objects away. | |
|
|
|
| concerning Risk of Eye Injury. |
|
| |
| ETL Standards Association |
|
|
|
| WARNING marking concerning | |
|
|
| Wear ANSI‑approved safety |
|
| ||
|
|
|
|
|
| Risk of Electric Shock. | |
|
|
|
| goggles with side shields. |
|
| |
|
|
|
|
|
| Properly connect power | |
|
|
|
|
|
|
| |
V~ | Volts Alternating Current |
|
| Read the manual before |
|
| cord to appropriate outlet. |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
Specifications
Electrical Rating | 120V~ / 60Hz / 1.4A |
| |
|
|
| |
Air Flow | 1590 CFM - High |
| |
1380 CFM - Low | Model# | ||
| |||
|
|
|
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before performing any procedure in this section.
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 7.
1. | Set the Ventilator on a flat, solid surface. | 3. Ensure that the switch is in the “OFF” |
2. | Ensure the Inlet and Outlet grills are | position before plugging the unit in. |
| ||
| firmly and securely in place. |
|
Workpiece and Work Area Set Up |
| |
|
|
|
1. | Designate a work area that is clean and well- | 3. Route the power cord along a safe route to reach |
| lit. The work area must not allow access by | the work area without creating a tripping hazard or |
| children or pets to prevent distraction and injury. | exposing the power cord to possible damage. The |
2. | There must not be drapes, paper or other forms | power cord must reach the work area with enough |
extra length to allow free movement while working. | ||
| of cloth nearby that could be pulled into the inlet |
|
| part of the ventilator obstructing air flow. |
|
General Operating Instructions |
| |
|
|
|
1. | Turn the fan on by moving the switch | 2. To prevent accidents, turn off the ventilator and |
| either to the right, or the left. The positions | disconnect its power supply after use. Clean, then |
| are noted next to the switch. | store the tool indoors out of children’s reach. |
WARNING! Do not reposition the fan while in use.
|
| REV 12c |
Page 6 | For technical questions, please call | Item 97762 |
