Maintenance and Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before performing any procedure in this section.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
SAFETY
1.BEFORE EACH USE, inspect the general condition of the tool. Check for:
•loose hardware,
•misalignment or binding of moving parts,
•cracked or broken parts,
•damaged electrical wiring, and
•any other condition that may affect its safe operation.
2.AFTER USE, wipe external surfaces of the tool with clean cloth.
3.
WARNING! If the supply cord of this tool is damaged, it must be replaced only by a qualified service technician.
OPERATION
Parts List and Diagram
Part Description
1Safety Grill
2Retaining Nut
3Washer
4Aluminum Fan
5Motor
Qty
2
1
1
1
1
Part Description
6Mounting Bracket
7Handle
8On/Off Switch
9Case
10 Power Cord
Qty
3
1
1
1
1
MAINTENANCE
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
Item 97762 | For technical questions, please call | Page 7 |
