Functional Description
refer to the Assembly Diagram near the end of this manual.
Specifications
Air Pressure Range | 90 PSI |
Maximum Air Pressure | 90 PSI |
Air Inlet | 1/4" |
Maximum Speed* | 700 RPM |
Air Consumption | 5 CFM @ 90 PSI |
Arbor/Chuck Capacity | 1/16 - 1/2" |
*Maximum speed at stated maximum air pressure. Excess air pressure is hazardous and may cause the tool to exceed stated maximum speed.
Components and Controls
Trigger 
Forward/Reverse
Lever
Fig. 1
1.Reversible feature controled by the Forward/Reverse lever next to the power trigger. (See Fig. 1.) Move switch up toward “F” for forward and down toward “R” for reverse
Initial Tool Set Up/
Assembly
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
Unpacking
When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown throughout the manual as soon as possible.
•This air tool may be shipped with a protective plug covering the air inlet. Remove this plug before set up.
Air Supply
To prevent explosion:
Use only clean, dry, regulated, compressed air to power this tool. Do not use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool.
Fig. 2 |
1.Incorporate an
SKU 98896 | For technical questions, please call | Page 8 |
