Page 11
SKU 97925, 99676 For technical questions, please call 1-800-444-3353.
Impact Wrench, and the Charger is unplugged from an electrical outlet prior to
making any adjustments to the tool.
trigger: Squeeze the Trigger to turn the Impact Wrench on and release pressure on the
Trigger to turn the Impact Wrench off.
Forward/reverse switch: The Forward/Reverse Switch allows you to change the rota-
tional direction of the Impact Wrench. For a clockwise rotation, move the Forward/
Reverse Button to the left. For a counterclockwise rotation, move the Forward/Re-
verse Button to the right. To avoid damage to the Impact Wrench, always wait until
the tool completely stops before changing rotational directions.
1/2" or 3/4” drive impact head: The Impact Head features a spring and ball to se-
curely hold a socket.
Battery: The power source for the Impact Wrench is a rechargeable, 19.2 VDC Battery.
Make sure to follow all safety precautions when working with the Battery.
Charger: The Charger is powered by plugging the Power Plug into a 120 volt, ground-
ed, electrical outlet. NEVER attempt to power the Charger with any other electrical
source other than a 120 volt, grounded electrical outlet.
to 120 Volt,
grounded,
electrical
outlet.
Battery
Charger
impact
head
trigger
Forward/reverse
switch
Battery
Figure a
Brush holder Cap
Charging
The Battery must be charged prior to the rst use of the Impact Wrench.1.
After rst use, the Battery should only be recharged when the performance of the 2.
Impact Wrench begins to diminish. Severe heat is destructive to batteries; the
more heat generated, the faster the battery will lose power. A battery that gets too
hot can be permanently damaged. Never discharge the battery by continuing to
REV 09b