Harbor Freight Tools ITEM 69451 Functions, Accessories, Specifications, Setup Before Use

Specifications

Tool Input	12VDC
Adapter Input	120V~ / 60Hz
Rotation Speed	16,000 RPM
Collet Size	1mm, 3mm, 3/32″, and 1/8″

Setup - Before Use:

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Functions

	Power Switch
1/8″ Shank with
Buffing Wheel

Safety

Setup

Collar Lock Button

Accessories

Note: Refer to Parts List and Diagram on page 11 for accessory illustrations.

Operation

•Use the Diamond Burr Bits (4) to drill hard, brittle materials, such as tile.

•Use the Mounted Stones (5) for sharpening cutting tools, screwdrivers etc, deburring metal after cutting, and removing excess material on metal and ceramics.

•Use the Sanding Drums (6) to smooth out rough areas on soft materials.

•Use the Cut-off Wheels (7) for cutting, carving and slotting materials.

•Use the Buffing Wheels (8) for polishing.

•Use the Wire Wheels (9) to clean dirty or rusted surfaces.

•Use the Whet Stone (10) for sharpening.

•Use the Drill Bits (11) to bore small holes.

•Mandrels are the shanks with a threaded or screw head.

Use them with the cut-off wheels, polishing wheels, and sanding discs. The shank without threads on the end is for the felt polishing wheels.

Maintenance

SKU 69451 For technical questions, please call 1-800-444-3353. Page 7