General Operating Instructions
1.Plug the Power Adapter into a standard, grounded 120V electrical outlet.
2.Connect the Rotary Tool to the Power Adapter.
3.Turn the Power Switch “ON” and allow the Rotary Tool to come up to full speed before beginning work.
4.Contact the material lightly. Do not press hard on the tool while working;
allow the tool to work at its own pace. It is better to make several shallow passes than to make one deep pass.
5.To prevent accidents, turn off the tool and disconnect its power supply after use. Clean, then store the tool indoors
out of children’s reach.
Safety
Setup
Operation
Maintenance
SKU 69451 | For technical questions, please call | Page 9 |