ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE: For additional information regarding the parts mentioned in the following pages, refer to the Assembly Diagram on page 10.
1.Locate the two mounting holes in the base of the Security Camera (1). Then use the two Wood Screws (4) to mount the Security Camera in the desired location on a wall or ceiling. Then, adjust the Security Camera to view a specific area.
(See Figure D.)
2.Connect the Security Camera Phone Jack to the Cable (2). (See Figure D.)
3.Connect the Audio/Video Output Cables to your television. NOTE: The Yellow Cable connects to the Yellow (video) television jack. The White Cable connects to the White (audio) television jack. (See Figure D.)
4.Plug the Adapter (3) into the nearest 120 volt, grounded, electrical outlet.
(See Figure A.)
5.Turn on your television, and set the channel selector to “AV Channel”*. The Secu- rity Camera’s view will then appear on the television screen. Turn up the volume on the television and the Security Camera’s
*The video input selector may be a function of the TV remote control.
SECURITY | TELEVISION | ||||
CAMERA | (NOT INCLUDED) | ||||
(1) |
|
| ADAPTER | ||
|
|
|
| (3) | |
|
|
| |||
| PHONE | CABLE |
| ||
|
| ||||
| JACK | (2) |
|
|
|
AUDIO/VIDEO
OUTPUT CABLES
FIGURE D
SKU 91851 | For technical questions, please call | Page 8 |