Spectra Watermakers MPC-5000 owner manual Product Tube Fitting Assembly, 1/4 Tube Fitting Assembly

Product Tube Fitting Assembly

O-ring	Spacer
	Grab Ring
Body

Nut

Step 1: Dissemble fitting components

Tubing

1/2" max

Step 2: Install the Nut first then use the bevelled side of the Spacer to push the Grab Ring onto the tube no more than 1/2". Slip the O-ring over the tube to hold the Spacer in place. If the Grab Ring is pushed too far, trim back the tube so about 1/4" of tube extends past the O-ring.

Step 3: Gently fit the tube into the body and loosely thread on the nut.

Step 4: Push the tube into the body until it bottoms out then hand tighten the nut.

DO NOT OVER TIGHTEN!

1/4" Tube Fitting Assembly

11